Return to site

Hammerli 208 Serial Numbers

broken image


Serial Number Database Search This database contains the Swiss Schmidt-Rubin straight pull rifles with the corresponding manufacturing years. Please enter the rifle serial number without prefix (ie. Several rifle types may be in the same serial number range. Which Swiss rifle do I have? You own a swiss rifle and don't know the exact. The Serial number or License key is a code or some digit which is generated by the Easysoft License server. So, the key is a combination of the machine number with some information that can be used for registration of a program, software or application. IDM Serial Number 2018 is a key that can register your Internet download manager software. Jun 06, 2020.

HAMMERLI 103-107

Hammerli 208s Magazine

It has a low S-02xx serial number and is in the original red lined box. Not sure why someone placed that styrofoam bullet insert in the box as I don't think it is original. Came with the original warranty, instruction manual, NRA post card, factory inspectors card with initials, and a Texas pawn shop layaway ticket from 1999.

Sight Adjustments

Elevation: Clockwise down.
Windage: Clockwise right.
1 click = 6mm @ 50m.

Trigger Adjustments

Hammerli

Trigger Weight: Turn screw 1138a clockwise to decrease weight.

Sear Engagement: To set sear engagement: Turn screw 1138 anti clockwise about two full turns. Then cock the set trigger and slowly turn screw 1138 clockwise until the sear releases. Then back off (turn anti clockwise) one quarter turn.

Trouble Shooting

If the action cannot be cocked, check whether trigger spring screw (1153) has become loose or whether the trigger-bar spring (1152), the hammer or the main spring has become defective.

Stripping

1. Remove grips.
2. On right side of breech casing move the block bolt locking piece (30). If this is not possible loosen its screw (60) by one turn and move loading lever (17) forward. Take off block bolt (40).
3. Take out block (8), which can be done easily by moving slightly loading lever (17). To do this the pistol has to be held in a position with the trigger-guard upwards and the sights showing to the ground.
4. Loosen forearm screw (56) and take it out.
5. Remove loading lever and hair trigger mechanism combining bolt (38) by knocking it out with a drift pin from left to right. (When mounting insert pin from opposite side).
6. Now the whole set trigger mechanism can be removed together with loading lever and hammer (18). Draw downwards following the cut of the cocking lever.
7. To reassemble, carry out in reverse order.

Set Trigger

Should the set trigger cease to work, give to a gunsmith to fully disassemble if necessary. Try thorough cleaning in petrol to see if this will fix it first.

208 Hammerli Pistol

Safety Hint

Hammerli 208 Vs 208s

Never close the action on a live round when the trigger is already cocked. Tough the trigger first to unset the trigger, otherwise the gun could fire accidentally on closing the action.

Hammerli 208s Serial Number Dates

Return to TenP Files Index





broken image